TDCV Ductile Iron Tilting Disc လီဗာနှင့် Counter Weight နှင့် Damper ပါရှိသော Non-slam Check Valve
မူလအစရာ: | တရုတ် |
ကုန်အမှတ်တံဆိပ်အမည်: | WALTER / OEM အမှတ်တံဆိပ် |
မော်ဒယ်နံပါတ်: | TDCV |
လက်မှတ်: | WRAS |
Email: [အီးမေးလ်ကိုကာကွယ်ထားသည်]
ဖေါ်ပြချက်
အနိမ့်အမိန့်အရေအတွက်: | 2 PCs |
စျေးနှုန်း: | Negotiable အ |
အသေးစိတ်ထုတ်ပိုး: | အထပ်သား Box |
ပို့ဆောင်ချိန်: | 3 သီတင်းပါတ် |
ငွေပေးချေမှုရမည့်စည်းမျဉ်းစည်းကမ်းများ: | T / T, LC |
ထောက်ပံ့ရေးနိုင်ခြင်း: | 800 PCS/Month |
WALTER TDCV Tilting Disc Check Valve is the non-return valve preferred in pipe networks where faster closure is required. Through the counter lever and weight attached to its shaft, ensures a soft open depending on the speed of the flow and maintains reduced closing times when flow stops. With its disc design where the center is shifted in two axis, this leads to a big improvement on decreasing operation torque values, lowering the friction on disc sealing area and extended service life.
feature ကို:
1.Double Eccentric / Double Offset Disc Design
2.Soft seal provides a drop tight closure
3.Tilting disc - when adjusted accordingly requires very small forward pressure drop to open
4.Adjustable lever and weight to assist the valve when closing to avoid water hammer - acts also as position indicator
5.All seals and coatings with contact to the medium are approved for drinking water
6.Low torque requirements during operation
7. ပျမ်းမျှ 250 microns ဖြင့် ကိုယ်ထည်နှင့် disc အတွင်းပိုင်းနှင့် အပြင်ပိုင်းကို အပြည့်အကာဖြင့် ဖုံးအုပ်ထားသည်။ လိုအပ်သည့်အခါတွင် ပိုမိုမြင့်မားသော coating အထူများကို ရရှိနိုင်သည်။
နည်းပညာဆိုင်ရာဒေတာ
1.Design: EN 1074-3
2.Face to Face- EN558 စီးရီး ၁၄
3.Flanges: BS EN1092-2 PN10/16/25; ISO7005-2
4.Testing: EN 12266-1
5. အရွယ်အစား အတိုင်းအတာ- DN150 မှ 2000
6.Pressure Rate: 1.0 Mpa; 1.6 Mpa; 2.5 Mpa
7. အပူချိန် : -10°C ~ 80°C
8.Coating: Fusion Bonded Epoxy resin ။
quick အသေးစိတ်
1,Tilting Disc Check Valve, Slanted Seat Check Valve, Butterfly Type Check Valve, Non-slam Check Valve
2,Tilting Disc Non-slam Check Valves are installed in pumping applications to prevent backflow in the system. All interior parts are stainless steel or coated with drinking water approved epoxy, lever and a weight fitted to the shaft end to help close the valve before the flow changes direction or a hydraulic damper that makes sure the disc does not slam into the seat and cause water hammer.
3,DN150 – 2000, PN10/16/25
applications ကို
1.Potable Water / Clean Water
2.Water Treatment
3.Industrial applications များ
အသေးစိတ်ဖော်ပြချက်
နံပါတျ | အပိုင်းအမည် | ပစ္စည်း |
1 | ကိုယ်ခန္ဓာ | GGG50 |
2 | disc | GGG50 |
3 | ပင်စည် | SS420 |
4 | Packing Cover | CS |
5 | Seal Bushing | Al-bronze |
6 | Protection Bushing | SS304 |
7 | ဝက်ဝံ | SS304 + PTFE |
8 | Taper Pin | SS420 |
9 | Seat Gland | SS304 |
10 | Seal on Disc | EPDM |
11 | ကန့်သတ်ရပ်တန့် | SS304 |
12 | ဝက်အူ | A2-7 |
13 | အို-လက်စွပ် | EPDM |
14 | မင်းတုံး | A2-7 |
15 | Counter Weight / Damper | GG25/Commercial |
DN | L | D | PCD | D1 | n-∅d | ||||
PN10 | PN16 | PN10 | PN16 | PN10 | PN16 | PN10 | PN16 | ||
DN150 | 210 | 285 | 240 | 211 | ၄-∅၁၉ | ||||
DN200 | 230 | 340 | 295 | 266 | ၄-∅၁၉ | ၄-∅၁၉ | |||
DN250 | 250 | 395 | 405 | 350 | 319 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN300 | 270 | 445 | 460 | 400 | 370 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN350 | 290 | 505 | 520 | 460 | 429 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN400 | 310 | 565 | 580 | 515 | 480 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN500 | 350 | 670 | 715 | 620 | 582 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN600 | 390 | 780 | 840 | 725 | 682 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN700 | 430 | 895 | 910 | 840 | 794 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN800 | 470 | 1015 | 1025 | 950 | 901 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN900 | 510 | 1115 | 1125 | 1050 | 1001 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN1000 | 550 | 1230 | 1255 | 1160 | 1112 | ၄-∅၁၉ | ၄-∅၁၉ | ||
DN1200 | 630 | 1455 | 1485 | 1380 | 1328 | ၄-∅၁၉ | ၄-∅၁၉ |